Blinds-chalet Day & Night RV Pleated Shades Bedienungsanleitung PDF herunterladen

1. Install mounting brackets (A) above top of

window frame. Mount brackets approximately

3” in from corner of window frame.

2. NOTE: On shades 40” or wider use 3 mounting

brackets, one in the center.

3. Install headrail (B) into mounting brackets by

tilting front of headrail in an up position. Slide

hook of mounting bracket into groove of

headrail. Then push back of headrail up until it

snaps into bracket.

4. Let shade hang down until end of cord with

cord retainer (D) meets the bottom rail (C).

NOTE: The spacers that can be attached to the

cord retainers are optional and are not

required for mounting the cord retainers.

Spacers allow for additional clearance if

needed to clear window knobs or any

additional objects that might interfere with

proper operation of the shade.

Now mount the cord retainer directly below the bottom rail ½” down. This creates the constant tension needed to

properly operate the shade. The tension should be tight.

Adjustments to tighten the tension require only a turn of the screw in the cord retainer. If you need to loosen the

cord you will have to untie the knot and retie at the desired tension. Adjustments should be made on both sides to

assure the shade will hang evenly.

CLEANING AND CARE

Shades should be kept in the closed or up position when not in use to maintain pleat retention and minimize dirt and

soil buildup. Do not store shades in the down position. This may cause some loss of pleat retention if shades are not

operated on a consistent basis.

NOTE: If your recreation vehicle must be stored for an extended period of time, store shades in the up position and

cover your window with additional protection, for example, cut out cardboard.

Shades can be easily cared for by simply dusting or using a vacuum cleaner attachment. Do not use spot remover,

household cleaners or detergents to remove soiled spots as these may cause damage to fabric or loss of color from

fading.

Seite 1

A B C D 1. Install mounting brackets (A) above top of window frame. Mount brackets approximately 3” in from corner of window frame. 2. NOTE:

Keine Kommentare

Blinds-chalet Day & Night RV Pleated Shades Bedienungsanleitung